Sound treatment

I've been busy lately re-doing my “studio” (aka office). First thing was to get a new desk (out with the Jerker, in with the Galant). After that it was an Eina night stand and a Galant drawer unit. The most recent thing has been building my own acoustic panels to deaden the sound in here a bit for better mixing and recording:


I had researched acoustic panels a bunch and there was a ton of conflicting information out there. It wasn't until I found this great how-to that it seemed approachable. The big issue for me was that the rigid fiberglass Americans use is Owens Corning 703 or 705 and figuring out what the equivalent was up here in Canada was difficult. (Turns out it's OFI 48).

After locating the right rigid fiberglass, I found some black muslin fabric and cut up some plywood I had laying around. I've made two panels so far – the second one is far uglier than the first because I am not skilled, but both of them provide a startling amount of sound dampening. I've been making non-sound nerds speak against my regular wall and then into the panels and they've been shocked at the difference even if they don't care about acoustics.

I'm going to build a few bass traps for behind my monitors and then a few free-standing panels I can move around and use for whatever and then I should be good for a while.